High-lift drum dumper
-- Packaging Digest, 12/15/2009 12:30:21 PM
Flexicon’s new TIP-TITE sanitary high-lift drum dumper allows drums to be loaded at floor level, sealed against a discharge cone, elevated and tipped, mating the cone to a gasketted receiving ring on downstream process equipment. The TIP-TITE dumper accommodates drums from 30 to 55 gal (114 to 208 liter) and can discharge bulk material into process vessels and equipment inlets 5 to 10 ft (1525 to 3050 mm) above the plant floor. The drum platform is raised by a single hydraulic cylinder, creating a dust-tight seal between the rim of a drum and the underside of the discharge cone. A second hydraulic cylinder raises the platform-hood assembly vertically before tipping it to a dump angle of 90 degrees, causing the vertically oriented cone to mate with a gasketted receiving ring. The ring can be fitted to the lid of an optional hopper with integral flexible screw conveyor or pneumatic pick-up adapter, or to existing process equipment. A pneumatically actuated slide gate valve prevents material flow until the discharge cone has been properly seated in the gasketted receiving ring. The all-stainless unit can be finished to sanitary or industrial standards. Other models are offered in mild steel with durable industrial coatings, or with material contact surfaces of stainless steel. Flexicon Corporation | 888/353-9426 | www.flexicon.com
.
Talkback
No related content found.
Sponsored Links
VIEW ALL GALLERIES
