ADVERTISEMENT
You will be redirected to your destination in 15 seconds.
Subscribe to Packaging Digest
RSS
Reprints/License
Print
Email

USDA turns beets into disposable, biodegradable plastic food packaging

Posted by Rick Lingle, Technical Editor -- Packaging Digest, 1/16/2013 4:02:05 PM

 

USDABeetsNewU.S. Department of Agriculture (USDA) scientists and university cooperators have developed a biodegradable plastic that could be used in disposable food containers. The thermoplastic becomes soft when heated.

 

To make the plastic, Agricultural Research Service (ARS) scientists incorporated biodegradable sugar beet pulp, which is the leftover residue from sugar extraction, with a biodegradable polymer. The result is thermoplastic composites that retain mechanical properties similar to polystyrene and polypropylene, the compounds used to make white, spongy food packages.

 

Processors generate tons of sugar beet pulp annually. Finding profitable uses for it is critical for the long-term economic viability of U.S. agribusiness. Now, ARS chemist LinShu Liu and plant physiologist Arland Hotchkiss, both at the ARS Eastern Regional Research Center in Wyndmoor, PA, and their colleagues have found a variety of new uses for sugar beet pulp. ARS is USDA's principal intramural scientific research agency.

 

In collaboration with professor Jinwen Zhang of Washington State University (WSU) in Pullman, Liu and his colleagues developed the thermoplastic, which is manufactured from both sugar beet pulp and a biodegradable polymer called polylactic acid, or PLA, using a twin-screw extruder. PLA is a commercially available polymer derived from the sugars in corn, sugar beet, sugarcane, switchgrass and other plants, all of which are renewable feedstocks.

 

The researchers showed that up to 50 percent sugar beet pulp can be incorporated with PLA to produce biodegradable thermoplastic composites that are similar to the petrochemical compounds used in making spongy disposable food packages. The new thermoplastic is cost-competitive with such commonly used petrochemical plastics, according to the scientists.

 

A study describing the work was published in Industrial & Engineering Chemistry Research. Read more about this research in the January 2013 issue of Agricultural Research magazine.
http://www.ars.usda.gov/is/AR/archive/jan13/pulp0113.htm


Source: Agricultural Research Service

 

.

RSS
Reprints/License
Print
Email
Talkback
Related Content

No related content found.

»MORE

Canon Resource Center

Featured Company


Most Recent Resources

Advertisement
Related Content
  • Blogs
  • Photos

KC Boxbottom

Adventures in Packaging

KC Boxbottom
January 4, 2013
The case of the perforated package
. “My suckers don’t suck,” Jimmy told me over the phone....
More

KC Boxbottom

Adventures in Packaging

KC Boxbottom
December 21, 2012
The case of the spotty slacks
. I was at Jan’s plant helping out with some OEE (overall equipment...
More

KC Boxbottom

Adventures in Packaging

KC Boxbottom
December 7, 2012
The case of the unstable label
“My labels are wandering,” said Kelley. “Well, that’s...
More

VIEW ALL BLOGS RSS

Advertisement
About Us   |   Advertising Info   |   Site Map   |   Contact Us   |   FREE Subscriptions   |   RSS
 © 2012 UBM Canon. All rights reserved.
Use of this Web site is subject to its Terms of Use | Privacy Policy