All Star Products

All Star Products manufactures and supplies single and two stage regenerative blowers.

For the past 15 years, All-Star has been providing OEMs with products that meet todays’ requirements and specifications.

Today, All-Star blowers, vacuum pumps and compressors are found in environmental applications that help to monitor the air we breath, clean waste water, remove toxic gas from landfills to toxic radon found in homes and buildings; in municipal and industrial applications from robotic pick-n-place to cleaning printed circuit boards; in the food industry that conveys and blend ingredients, providing air for ovens for baking, to pick-n-place finished products in shipping cartons, to clean and drying fresh fruit before delivery to local markets; in the medical industry from dental suction pumps to hospital and health care needs.

All-Star provides the air supply to convey deposits at a local bank drive-in teller window to conveying money at box stores such as Walmart and others. Our OEM’s customer list includes recognizable companies today, such as Coca-Cola Gatorade, Disney Cruise Ship Line, 3D Systems, Alter_G medical treadmill and thousands of other Users. All-Star is prepared to help OEMs meet the most demanding applications with a cost-effective and high performance solution. Give us a call to see what other OEMs have discovered about our quality product solutions.

Products: 

Regenerative Blowers and Vacuum Pumps

All Star blowers include an impeller and a side channel formed with a semi-circular side wall, having an inlet and outlet. As the impeller rotates, the air between the impeller blades is radially and circumferentially accelerated and pushed into the side channel. Here it is further compressed and forced back towards the impeller blades where the air is further accelerated. As air is transported along a spiral path through the impeller and side channel, each impeller blade increases the compression and acceleration until the air reaches the point where the side channel is connected to the discharge flange, where it is discharged.
Supplier Categories: 
We provide the air supply to convey deposits at a local bank drive-in teller window to conveying money at box stores such as Walmart and others.

Related Content:

The Nice-Pak story began as the brainchild of our company’s founder, Arthur Julius, who came up with the idea for the world’s first disposable wet napkin. Julius was convinced that wet wipes could provide the best delivery system for cleaning and...

Q-Pumps is the world leader in sanitary pump industry, with presence in over thirty countries. We manufacture our products on high quality standards that guarantee a 100% satisfaction on our costumers. We proudly achieved the 3-A and EHEDG...

Kärcher Canada, located in Mississauga, Ontario, is a subsidiary of Alfred Kärcher GmBh and Co. located in Germany. Kärcher is family owned, has been in business since 1935 and is now the world’s largest manufacturer of cleaning equipment. Kärcher is...

With over 25 years of experience in manufacturing aqueous cleaning equipment, we have developed one of the largest families of parts washing equipment in the industry. If a catalog washer will not fit your application, ADF will modify an existing...

With forty years of experience, Tiger-Vac has successfully established itself in the international market as a manufacturer of high-quality industrial, explosion proof, cleanroom and ATEX, IECEx, NFPA-NEC compliant vacuum cleaner...

The Habasit Saniclip is an innovative device for quick belt opening and easy belt sanitation. This unique rod retention system is specifically designed to work with our Micropitch M0870, M0885 and M1185 belts. The Saniclip allows for simple rod...

Because of its solid team of experts, with its full range of products and with its high quality customer service, Hardy Filtration is in a position to respond efficiently to the various needs of its customers. No matter what...

The PEEK 3/8 NPT Super Air Nozzle has been designed to deliver the strongest blowing force and uses a protective aerodynamic design that guides airflow to a single point of convergence.  The PEEK Super Air Nozzle’s plastic construction makes it ideal...

KLEENLine, based in Newburyport, MA, is a leading provider of sanitary production solutions including conveyors, material handling equipment, vision systems, robotics, automation controls, and systems engineering services. We have earned our...

During that time, we have helped customers comply with air emission regulation in industries such as glass, wood products, pulp and paper, automotive, chemical, pharmaceutical, food, metals, petrochemical, electrical power and steam generation,...

Headquartered in Plymouth, Massachusetts, Flexo Concepts™ manufactures TruPoint™ doctor blades, the TruPoint QuikWash™ System and wash-up blades, and MicroClean™ dry media anilox cleaning systems. All products are designed to improve print quality and...

For almost twenty years, Filter 1 has been designing and manufacturing industrial air filtration systems. As a custom dust collector manufacturer, Filter 1 is an engineering-intensive company. All of our dust collection systems are designed by...

EXAIR's new 1-inch High Power Flat Super Air Nozzle produces a flat 1-inch (25mm) wide airstream with a strong blowing force of 16 ounces (462g) when mounted 12-inch (305mm) from the target. The unique design of this super-efficient nozzle...

Founded in 1994, the company has grown from a small restaurant wipe supplier to become the largest consumer and industrial wet wipes manufacturer on the west coast.

Diamond Wipes manufactures out of a modern, solar-powered, 130,000 square-foot...

For decades, Rasco Industries, Inc. has provided screening solutions to a variety of industries. We worked closely with major food packaging and processing plants, food inspection organizations, and a USDA laboratory to assure a product design and...

The Habasit Saniclip is an innovative device for quick belt opening and easy belt sanitation. This unique rod retention system is specifically designed to work with our Micropitch M0870, M0885 and M1185 belts. The Saniclip allows for simple rod...

The PEEK 3/8 NPT Super Air Nozzle has been designed to deliver the strongest blowing force and uses a protective aerodynamic design that guides airflow to a single point of convergence.  The PEEK Super Air Nozzle’s plastic construction makes it ideal...

EXAIR's new 1-inch High Power Flat Super Air Nozzle produces a flat 1-inch (25mm) wide airstream with a strong blowing force of 16 ounces (462g) when mounted 12-inch (305mm) from the target. The unique design of this super-efficient nozzle...

Founded in 1994, the company has grown from a small restaurant wipe supplier to become the largest consumer and industrial wet wipes manufacturer on the west coast.

Diamond Wipes manufactures out of a modern, solar-powered, 130,000 square-foot...

The Nice-Pak story began as the brainchild of our company’s founder, Arthur Julius, who came up with the idea for the world’s first disposable wet napkin. Julius was convinced that wet wipes could provide the best delivery system for cleaning and...

Q-Pumps is the world leader in sanitary pump industry, with presence in over thirty countries. We manufacture our products on high quality standards that guarantee a 100% satisfaction on our costumers. We proudly achieved the 3-A and EHEDG...

Sanitech Corporation has developed an extensive line of sanitation systems designed to satisfy the unique requirements of the Food Industry. Since our founding in 1985, we have been singularly focused on this market and have consistently committed the...

With over 25 years of experience in manufacturing aqueous cleaning equipment, we have developed one of the largest families of parts washing equipment in the industry. If a catalog washer will not fit your application, ADF will modify an existing...

We develop and manufacture innovative conveying systems and equipment at the highest technological level for the national and international food, beverage and packaging industries.

Our custom engineered solutions and equipment meets or exceeds...

Does your business use expensive solvents in its manufacturing or fabrication processes? Would you like to store fewer solvents on-site and reduce your need for costly waste disposal services? Is your company concerned with environmental and worker...

Douglas Machines Corp. offers a full line of commercial and industrial washers for all containers commonly used in the bakery, meat, poultry, food processing, packaging and distribution industries.

More than 80 standard commercial and industrial...

For almost twenty years, Filter 1 has been designing and manufacturing industrial air filtration systems. As a custom dust collector manufacturer, Filter 1 is an engineering-intensive company. All of our dust collection systems are designed by...

Headquartered in Plymouth, Massachusetts, Flexo Concepts™ manufactures TruPoint™ doctor blades, the TruPoint QuikWash™ System and wash-up blades, and MicroClean™ dry media anilox cleaning systems. All products are designed to improve print quality and...

Fogg is a world leader in the design and manufacture of rotary filling, rinsing, capping and enclosure systems for free flowing and viscous liquids. They endeavor to combine skilled craftsmen with innovative management to offer their customers a...

Fowler Products, powered by Pro Mach, manufactures high-performance capping machinery and cap-feeding systems. Fowler, in partnership with Zalkin, has earned strong customer loyalty and recognition as a leader in capping technology by delivering on-...

Fumex, Inc. has been a worldwide leader in the design and manufacture of quality fume extraction systems as well as commercial and industrial air filtration systems for over 25 years. Modern manufacturing processes often require the use of materials...

Girton Manufacturing Co., Inc. is a manufacturer of stainless steel washing equipment for Food and Dairy Processing, Pharmaceutical Production and Laboratory Animal Care Equipment.

Girton’s custom line of over 12 model variations of cabinet and...

Because of its solid team of experts, with its full range of products and with its high quality customer service, Hardy Filtration is in a position to respond efficiently to the various needs of its customers. No matter what...

Tuesday, June 9, 2015 to Thursday, June 11, 2015

EastPack serves up packaging solutions for various markets located on or near the east coast of the U.S., from new automation technologies on packaging machines to the latest structures and designs.

Tuesday, June 9, 2015 to Thursday, June 11, 2015

The health and beauty aids markets get down to business at the HBA Global pavilion at the EastPack show. Solutions include new formulations and their raw ingredients, contract...

Tuesday, June 9, 2015 to Wednesday, June 10, 2015

Experience a worldclass conference program along with the U.S. debut of the Innovation Gallery, which will showcase the latest innovations in pharmaceutical packaging and delivery systems.

Tuesday, June 16, 2015 to Thursday, June 18, 2015

Canada's leading showcase of packaging solutions combines an active Resource Hall of exhibits with a dynamic conference program to deliver the kind of necessary connections to move your packaging projects forward.

Tuesday, July 7, 2015 to Wednesday, July 8, 2015

Thought leaders and disruptive thinkers made last year's Global Food & Beverage Packaging Summit a blockbuster event. This year, we're upping the game with a program that looks ahead to tomorrow's challenges and directs you to viable solutions...

Wednesday, October 7, 2015 to Thursday, October 8, 2015

Philadelphia hosts the region's new annual packaging event, boosted by medical and other manufacturing-related co-located shows.

Tuesday, October 13, 2015 to Wednesday, October 14, 2015

Join the hoorah in Houston, as TexasPack 2015 brings you the latest in packaging products from top suppliers. Plus, the new 2-hour Learning Labs explore hot topics like 3D printing, quality in packaging and more.

Wednesday, November 4, 2015 to Thursday, November 5, 2015

Your local midwest packaging event brings live demonstrations of the latest equipment, design ideas and expert speakers on hot topics such as 3D printing, design ideation and innovation, supplier quality and more.

Wednesday, November 18, 2015 to Thursday, November 19, 2015

Orlando, FL, is your best destination for packaging machinery, materials and services solutions. The SouthPack 2015 event assembles exhibits showing the latest products along with new 2-hour Learning Labs to feed your educational hunger.