Medical Packaging

Content Tabs


Article

Nurses and technicians were quite vocal as they opened medical device packages submitted for feedback during HealthPack’s annual “Voice of the Customer—Nurses & Technicians” panel.


Article

A few years ago Tim Early envisioned a unique approach to staffing and consulting—described below as “an open-talent economy format”—and so he founded Network Packaging Partners.


Article

To promote health and safety while supporting medical
device innovation, the European Commission, Council,
and Parliament are transforming the Medical Device
Directives (MDD; Council Directive 90/385/EEC


Article

At MD&M West’s Center Stage, Packaging Professionals Karen Greene and Minda Grucela offered tips on developing a rationale for packaging validation.


Article

Medical device packaging design is an integral part of delivering your device to market safely and securely, with the sterile barrier intact.


Article

One stop on our Packaging Innovation Tour at MD&M Minneapolis 2016 was Gel-Pak, a company offering a biocompatible gel that can be coated onto the bottom of boxes, trays, slides, and films to secure medical components in p


Article

Packaging conferences typically don’t take attendees outside their comfort zones. Unless, of course, it’s the Healthcare Packaging Immersion Event.


Article

Looking for some new ideas in medical device packaging?


Article

Computer Designs Custom Thermoforming’s forte is designing packaging using almost any material, says Chuck Ortwein, account executive.


Article

The Healthcare Packaging Immersion Experience (HcPIE) does just that—immerses you into settings that simulate how your packaging will be used.


Article

It’s important for medical packaging engineers to fully understand all medical packaging requirements and be aware of global medical packaging standards, says Curt Larsen, consultant at Spartan Design Group and a member of


Article

Oliver-Tolas Healthcare Packaging and Mangar Medical Packaging expect their recent merger to “provide customers with access to additional products, technologies, and levels of service without having to diversify their supply b


Article

As part of its mission to reduce the amount of healthcare packaging waste sent to landfill, Beacon Converters has come up with a unique way to highlight material recovery.


Article

Nurses and medical technicians evaluated packages during a Voice of the Customer focus group broadcast live at this year’s HealthPack, held in New Orleans March 15-17.


Article

Oliver-Tolas Healthcare Packaging recently expanded its operations in Hamilton, OH, to include an additional high-speed coating line for producing its SealScience heat-seal coatings for sterile-grade packaging materials.


Nurses and technicians were quite vocal as they opened medical device packages submitted for feedback during HealthPack’s annual “Voice of the Customer—Nurses & Technicians” panel. Ease of opening and prominent labeling information were key...


A few years ago Tim Early envisioned a unique approach to staffing and consulting—described below as “an open-talent economy format”—and so he founded Network Packaging Partners. Today, NPP supports clients in the medical device, pharmaceutical,...


To promote health and safety while supporting medical
device innovation, the European Commission, Council,
and Parliament are transforming the Medical Device
Directives (MDD; Council Directive 90/385/EEC
for active implantable...


At MD&M West’s Center Stage, Packaging Professionals Karen Greene and Minda Grucela offered tips on developing a rationale for packaging validation. They spoke February 9 in the panel discussion: “...


Medical device packaging design is an integral part of delivering your device to market safely and securely, with the sterile barrier intact. Yet this critical process is often given little attention in the overall product development process....


One stop on our Packaging Innovation Tour at MD&M Minneapolis 2016 was Gel-Pak, a company offering a biocompatible gel that can be coated onto the bottom of boxes, trays, slides, and films to secure medical components in place during transport...


Packaging conferences typically don’t take attendees outside their comfort zones. Unless, of course, it’s the Healthcare Packaging Immersion Event. Held at Michigan State University...


Looking for some new ideas in medical device packaging? If so, please join us for a free tour at MD&M Minneapolis and...


Computer Designs Custom Thermoforming’s forte is designing packaging using almost any material, says Chuck Ortwein, account executive. The company started 20 years ago designing tooling for customers using CAD/CAM software, and “along the way...


The Healthcare Packaging Immersion Experience (HcPIE) does just that—immerses you into settings that simulate how your packaging will be used.

“Medical device manufacturers tend to run tests in optimized conditions,” explains Dr. Laura Bix,...


It’s important for medical packaging engineers to fully understand all medical packaging requirements and be aware of global medical packaging standards, says Curt Larsen, consultant at Spartan Design Group and a member of PMP News’s...


Oliver-Tolas Healthcare Packaging and Mangar Medical Packaging expect their recent merger to “provide customers with access to additional products, technologies, and levels of service without having to diversify their supply base,” reports Jody...


As part of its mission to reduce the amount of healthcare packaging waste sent to landfill, Beacon Converters has come up with a unique way to highlight material recovery.  The sterilization packaging manufacturer has commissioned the creation of...


Nurses and medical technicians evaluated packages during a Voice of the Customer focus group broadcast live at this year’s HealthPack, held in New Orleans March 15-17. As these users opened packages, they answered questions from IoPP’s Medical...


Oliver-Tolas Healthcare Packaging recently expanded its operations in Hamilton, OH, to include an additional high-speed coating line for producing its SealScience heat-seal coatings for sterile-grade packaging materials. The company recently...


The companies main line of business is packaging machines for both The Food and Medical Device Industries. Colimatic has over 40 years of experience in design and manufacturing of innovative machinery systems. 

Our packaging machinery...


For over sixty years, Comar, Inc. has supplied innovative packaging solutions to the Pharmaceutical, Biotech, Diagnostic, Ophthalmic, HealthCare, Personal Care and Retail Pharmacy markets with an emphasis on quality and service.

Comar...


Harpak-ULMA is the North American distributor of G. Mondini tray sealers, ULMA primary packaging equipment, and RAMA secondary packaging machinery.

Harpak-ULMA’s experience allows the company to offer completely integrated packaging and...


Today SARONG provides thermoforming machines, packaging materials and contract packaging services worldwide. 
SARONG is a  market leader for pharmaceutical suppository packaging machines, with more than 600 machines sold in 50 countries; ...


Packaging engineers are often the last team members invited to a product launch and yet the failure of medical device or pharmaceutical packaging can doom the project and profits. Acquiring the best sealing equipment and tooling will reduce...


Bel-Art Products simplifies tasks with innovative product solutions for science, industry and healthcare. Over 3500 items from safety wash bottles to fume hoods are manufactured and distributed worldwide under well-known brand names including...


Doyen Medipharm advanced converting and packaging solutions. We specialise in Wound care converting, Wound care packaging, Transdermal converting, Transdermal packaging and Oral Film strip converting machines. Doyen Medipharm design, manufacture...


Fargo Automation is an OEM who designs and manufacturers packaging lines and packaging machinery for the pharmaceutical and medical device industry based on customer specifications, not ours. The ever increasing demand for higher OEE (Overall...


Medical Systems for Industry supplies equipment, components and services to medical device, pharmaceutical and diagnostic test kit manufacturers.

Equipment that we supply includes: medical products assembly equipment, medical products...


Mesa Labs provides closure torque measurement systems to Quality Control Laboratories and On-Line Production Facilities throughout the world. Mesa Labs began the development of the first electronic closure torque testing device in 1985.

The...


Founded in 1982 by Owen J. Kellett Sr. (hence the namesake “OK”) and his daughter Ann Marie Kellett, the OK International Group is proud of its Company's heritage and the expectations it sets. As OKI moves forward in the 21st Century, its goal is...


Oliver-Tolas® Healthcare Packaging is your single source for unsurpassed quality, innovative medical device and pharmaceutical packaging, superior adhesives, and expert technical support.

Oliver-Tolas Healthcare Packaging is one of the world...

Wednesday, March 29, 2017 to Thursday, March 30, 2017

Advanced Design & Manufacturing Cleveland showcases five zones on one show floor: Packaging, Automation & Robotics, Design & Manufacturing, Plastics and Medtech.

Wednesday, April 19, 2017 to Friday, April 21, 2017

CPhI Japan 2017 gathers more than 19,000 pharma professionals together for a host of events that cover all aspects of the pharmaceutical supply chain, including packaging. Co-located with InnoPack.

Wednesday, May 3, 2017 to Thursday, May 4, 2017

BIOMEDevice is New England’s source for every aspect of medical device design and development, including packaging solutions. Find the materials, technologies, ideas, equipment and suppliers you need.

Tuesday, May 16, 2017 to Thursday, May 18, 2017

At PackEx Toronto, benefit from hands-on access to the newest packaging and processing technologies, equipment and materials.

Tuesday, May 16, 2017 to Thursday, May 18, 2017

At ATX Canada 2017, be inspired by the latest technologies and insights applicable to packaging operation, including robotics, motion control, vision, rapid prototyping, software and more.

Tuesday, May 16, 2017 to Thursday, May 18, 2017

Toronto Powder & Bulk Solids 2017 puts you face-to-face with North America’s leading suppliers displaying hundreds of solutions, including packaging, to help accelerate product-to-market.

Tuesday, June 13, 2017 to Thursday, June 15, 2017

EastPack 2017 packages up new technologies and solutions from hundreds of suppliers. Plus, gain insights from the free presentations at Center Stage, Tech Theater and during the Innovation Tours.

Tuesday, June 13, 2017 to Thursday, June 15, 2017

For more than 30 years, MD&M East has been the trusted resource for every aspect of medical device development, including packaging, to take your product from concept to commercialization.

Tuesday, June 13, 2017 to Thursday, June 15, 2017

At ATX East 2017, meet with top automation experts and see solutions geared toward maximizing your packaging productivity and profitability.

Tuesday, June 13, 2017 to Thursday, June 15, 2017

Quality drives productivity and productivity drives revenues. For critical packaging functions, Quality Expo 2017 brings focus to technology, equipment, materials and services that support quality.

Wednesday, November 8, 2017 to Thursday, November 9, 2017

At MinnPack 2017, experience the newest packaging technologies and equipment first-hand, meet suppliers one-on-one and compare solutions side-by-side.

Wednesday, November 8, 2017 to Thursday, November 9, 2017

Attend MD&M Minneapolis 2017 and find everything you need to design and develop the next generation of medical devices and equipment, including packaging solutions.

Wednesday, November 8, 2017 to Thursday, November 9, 2017

ATX Minneapolis 2017 gives you direct access to knowledgeable suppliers, the latest technologies and networking opportunities. Plus it has access to five other related manufacturing events.