Adents

The Most Powerful and Reliable Serialization and Traceability Solution

Adents is a leading software company providing solutions for unique product identification and traceability to help pharmaceutical companies and contract manufacturing organizations (CMOs) adapt to market changes and comply with regulations on drug traceability.
Adents Seriza, a serialization solution for manufacturing sites, has been selected as preferred solution by Siemens for its customers.  Adents Prodigi, a cloud solution jointly developed with Microsoft and powered by Azure technologies, allows for secure data exchange and helps leverage the power of serialization data.

Adents operates globally, with offices in Europe and in the United States and a worldwide network of solution partners.

Products: 

Adents Seriza

Adents Seriza is a cutting edge serialization software that enables you to uniquely identify each and every one of your products at all levels of packaging (case, bundle, carton, and pallet) across all your lines.
Supplier Categories: 
Adents is a leading software company providing solutions for unique product identification and traceability to help pharmaceutical companies and contract manufacturing organizations (CMOs) adapt to market changes and comply with regulations on drug traceability.

Related Content:

FDA is delaying enforcement of the upcoming product identifier requirement under the Drug Supply Chain Security Act, but should this delay alter your plans?

This past June, FDA announced that the agency “does not intend to take action against...

Validation is a critical step in implementing serialization programs. Planning your validation approach early on can help you establish your solution objectives and work toward minimal production downtime and cost, explains Vito Pirrera, executive...

Systech, a global leader in product verification and brand protection, is re-defining the future of authentication. As the innovator in serialization, Systech is trusted by top pharmaceutical companies worldwide to ensure regulatory compliance,...

Johnson & Johnson Supply Chain (JJSC) and AmerisourceBergen Corporation (ABC) recently collaborated on a pilot study on implementing GS1 traceability standards. PMP News asked Mike Rose, Vice President of Supply Chain Visibility, and...

Late 2016 was a busy season for Brazil, as the end of the year saw several developments in Brazil’s serialization program for medicines, Peter Schmitt, Managing Director & Co-Founder of Montesino...

With about one year to go before U.S. deadlines begin phasing in, serialization continues to present challenges for pharmaceutical companies. “Time’s running out,” says Jim Cummings, vice president, Americas, for Adents. He spoke with PMP...

The Open Serialization Communication Standard (Open-SCS) Group was founded last year to standardize packaging line serialization and aggregation data exchanges by developing a set of industry-wide standards. Vendors comprising the group include...

As 2017 deadlines for pharmaceutical serialization draw near, Steve Wood, president of Covectra (www.covectra.com), has seen an increase in activity. “The large pharmaceutical companies decided years ago to get...

It is time for pharmaceutical companies and their supply-chain partnersincluding their contract manufacturing and packaging partnersto establish all expectations for serialization projects and begin. 

By...

With the emergence of drug serialization requirements in life sciences over a decade ago, many manufacturers embarked on ad hoc pilot projects to identify potential difficulties. Many of those projects lacked adequate funding and saw potential...

Several packaging chapters within the U.S. Pharmacopeia—including some mandatory ones—are now being revised and updated, which could significantly influence pharmaceutical packaging development and specifications (tests, methods, and acceptance...

A symposium on serialization and track and trace at Pharmapack Europe will explore the current requirements and offer ideas to tackle implementation challenges.

Pharmaceutical companies continue to face “a persistent and increasing threat from...

Healthcare product manufacturers have time to address some of the challenges in implementation thanks to the staggered deadlines for Unique Device Identification and a lengthy phase-in period for U.S.-market pharmaceutical item-level serialization....

System ID partners with small to medium-sized businesses to help them secure the best barcode solutions for their organizations. Customers benefit from the company’s 30 years of experience, unsurpassed knowledge, and consultative approach to the...

FDA is delaying enforcement of the upcoming product identifier requirement under the Drug Supply Chain Security Act, but should this delay alter your plans?

This past June, FDA announced that the agency “does not intend to take action against...

Validation is a critical step in implementing serialization programs. Planning your validation approach early on can help you establish your solution objectives and work toward minimal production downtime and cost, explains Vito Pirrera, executive...

Johnson & Johnson Supply Chain (JJSC) and AmerisourceBergen Corporation (ABC) recently collaborated on a pilot study on implementing GS1 traceability standards. PMP News asked Mike Rose, Vice President of Supply Chain Visibility, and...

Late 2016 was a busy season for Brazil, as the end of the year saw several developments in Brazil’s serialization program for medicines, Peter Schmitt, Managing Director & Co-Founder of Montesino...

With about one year to go before U.S. deadlines begin phasing in, serialization continues to present challenges for pharmaceutical companies. “Time’s running out,” says Jim Cummings, vice president, Americas, for Adents. He spoke with PMP...

The Open Serialization Communication Standard (Open-SCS) Group was founded last year to standardize packaging line serialization and aggregation data exchanges by developing a set of industry-wide standards. Vendors comprising the group include...

As 2017 deadlines for pharmaceutical serialization draw near, Steve Wood, president of Covectra (www.covectra.com), has seen an increase in activity. “The large pharmaceutical companies decided years ago to get...

It is time for pharmaceutical companies and their supply-chain partnersincluding their contract manufacturing and packaging partnersto establish all expectations for serialization projects and begin. 

By...

With the emergence of drug serialization requirements in life sciences over a decade ago, many manufacturers embarked on ad hoc pilot projects to identify potential difficulties. Many of those projects lacked adequate funding and saw potential...

Several packaging chapters within the U.S. Pharmacopeia—including some mandatory ones—are now being revised and updated, which could significantly influence pharmaceutical packaging development and specifications (tests, methods, and acceptance...

A symposium on serialization and track and trace at Pharmapack Europe will explore the current requirements and offer ideas to tackle implementation challenges.

Pharmaceutical companies continue to face “a persistent and increasing threat from...

Healthcare product manufacturers have time to address some of the challenges in implementation thanks to the staggered deadlines for Unique Device Identification and a lengthy phase-in period for U.S.-market pharmaceutical item-level serialization....

The ACE-CT400 Coding & Verification Unit can provide track & trace capabilities as granular as unit-level and accepts cartons ranging in size from 20x20x80mm to 120x80x200mm at a maximum speed of 400 per minute.  

Coding on the ACE-...

“Introduction of counterfeit products in the normal international supply chain poses particular issues for pharmaceutical companies, both from direct risk to their customers and to their own reputation within what is a highly competitive industry,”...

Flexoprint Inc believes in providing superior packaging solutions and services along every step of the production process, while offering fast turnaround times and cultivating solid business relationships with customers from the beginning. We are a...

We are a premier solution provider for Auto ID technology using wired and wireless networks, performance barcode printers, mobile computing, scanning and custom software. We currently carry over 14,000 of these products and offer a variety of services...

Pacfic Barcode is committed to world class customer service. Whether you need preprinted barcode labels or a completely outfitted warehouse, Pacific Barcode is your solutions provider with name brand and OEM barcode scanners, software, printers and...

Systech, a global leader in product verification and brand protection, is re-defining the future of authentication. As the innovator in serialization, Systech is trusted by top pharmaceutical companies worldwide to ensure regulatory compliance,...

There's something different. That's what our customers tell us about working with Brady. You've tried to pinpoint it - some of you say it's the level of service and the quality of our products; others say it's the dedication of our team members and...

Our Consulting Services

LABELING EQUIPMENT, SCALE PRINTER COMBINATION:

We are an authorized dealer for Auto Labe labeling machines and supplies,offering a full line of label applicators from small ""Table Top"" semi...

WG International, Inc. was established in 1996, our internet department, inkground.com, has become one of the most competitive online retailers of printer supplies in the US. We provide remanufactured and compatible Ink Toner and Drum Cartridges for...

System ID partners with small to medium-sized businesses to help them secure the best barcode solutions for their organizations. Customers benefit from the company’s 30 years of experience, unsurpassed knowledge, and consultative approach to the...

Monday, February 5, 2018 to Wednesday, February 7, 2018

WestPack 2018 delivers leading technologies, free educational presentations, hands-on demonstrations and expert-led Innovation Tours.

Monday, February 5, 2018 to Wednesday, February 7, 2018

At MD&M West 2018, find answers to your medtech challenges—from prototyping to packaging.

Tuesday, February 6, 2018 to Wednesday, February 7, 2018

Pharmapack Europe 2018 is Europe's dedicated pharmaceutical packaging and drug delivery event.

Tuesday, March 6, 2018 to Wednesday, March 7, 2018

ADM Cleveland 2018 showcases the latest in robotics, automation, plastics, packaging and design engineering.

Tuesday, April 17, 2018 to Wednesday, April 18, 2018

From contract packaging/manufacturing to components, BIOMEDevice Boston 2018 helps you develop the next gen of medical devices.

Monday, April 23, 2018 to Wednesday, April 25, 2018

CPhI North America 2018 is the epicenter for pharma innovation, emerging trends, insights and education.

Monday, June 11, 2018 to Wednesday, June 13, 2018

EastPack 2018 highlights two industry mega-trends: smart manufacturing and 3D printing. See the latest cobots and a dedicated 3D Printing Zone.

Monday, June 11, 2018 to Wednesday, June 13, 2018

MD&M East 2018, now in its 34th year, is the largest medtech event on the East Coast.

Tuesday, October 30, 2018 to Wednesday, October 31, 2018

Back for its 15th year, MinnPack 2018 brings you the latest packaging equipment, automation and design ideas.

Tuesday, October 30, 2018 to Wednesday, October 31, 2018

MD&M Minneapolis 2018 features an expanded conference, sessions on the expo floor, networking activities and expert-led Innovation Tours.

Tuesday, November 13, 2018 to Wednesday, November 14, 2018

PackEx 2018 is Québec’s largest, most comprehensive packaging event. Explore the latest innovations, processes and new products.