Packaging Digest is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Eisai USA

Eisai Machinery is a world-leading manufacturer of equipment for the inspection of syringes, vials, ampoules and cartridges, and the parenteral products they contain.

Now part of Bosch Packaging Technology

Eisai Machinery is a world-leading manufacturer of equipment for the inspection of syringes, vials, ampoules and cartridges, and the parenteral products they contain.

We are based in Japan, China, USA and Europe providing a wide range of manual, semi-automated and fully automated inspection systems to pharmaceutical manufacturers all over the world.

Our inspection technology is used in the area of liquid pharmaceuticals, for instance with ampoules, pre-filled syringes, infusion bottles or vials, as well as in the production of solid pharmaceuticals such as tablets. In addition, we are selling packaging materials for pharmaceutical products, as well as pharmaceutical packaging machines from various manufacturers.

Our solutions include most accurate detection of particulates, fill level and cosmetic defects. Technical Service and Validation Support is available worldwide.

Supplier Categories: 
Our Bosch FVS auger filler series was specially designed for the volumetric filling of free-flowing products.

Related Content:

Two growing trends in pharmaceuticals prompted the development of a new high-performance pouch that addresses the mechanical and purity challenges of packaging a liquid biologic or vaccine that requires low temperatures. The Gore Sta-Pure Flexible...

Packaging is taking on a more prominent role in protecting opioids from abuse, misuse and theft, with innovative designs leading the way. One of these uses biometric (fingerprint) authorization to ensure that patients—and only patients—receive their...

It’s hard to imagine why any of us would not comply with the prescription from our doctor. After all, we initially went to the doctor to help treat our health issues. But then we veer off the path of taking medications as prescribed, only to return...

Pharmaceutical packaging, in the form of packs that control access to opioids, has been in the limelight recently, with recently enacted legislation driving regulatory changes in the United States.

With an eye on the new legislation and the U.S...

How can pharmaceutical packaging production executives prevent “innovation inertia”? A new report outlines key points in the issue and offers solutions from industry expert Girish Malhotra, who warns that regulators are holding back the pharma...

CPhI North America 2019 is the epicenter for pharma innovation, emerging trends, insights and education.

Pharmapack Europe 2019 is Europe's dedicated pharmaceutical packaging and drug delivery event.

Production capacity for Aclar films is expanding this year to meet increasing global demand, Honeywell reports in a news release. Aclar is used in blister packaging applications that require high moisture barrier performance.

“The capacity...

End-users are confirming that Anobex is “an equivalent, 'drop-in' replacement for Barex,” reports Dan Mullock, COO at MSM Poly. Samples of converted Anobex (acrylonitrile methyl acrylate copolymer latex) have already been sent to a number of...

Patient compliance is important with any prescription drug, but particularly if the drug could be habit-forming. To help ensure compliance with Instanyl, a nasal opioid, Takeda Pharmaceuticals International AG has chosen pharmaceutical packaging that...

FDA has approved a combination package containing two prescription drugs for advanced breast cancer. Novartis reports that FDA has approved the Kisqali Femara Co-Pack, calling it the "first and only" currently available combination pack...

 

The role of packaging in navigating increasing industry competition

Over the last twenty years, demand for generic pharmaceuticals has tripled in the United States.[1] As patents for...

At Pharmapack Europe 2017, find hundreds of packaging solutions and drug delivery technology suppliers that serve the pharmaceutical, biopharmaceutical and veterinary markets.

CPhI Japan 2017 gathers more than 19,000 pharma professionals together for a host of events that cover all aspects of the pharmaceutical supply chain, including packaging. Co-located with InnoPack.

Pharmaceutical and medical packaging solutions will be on display at Pack Expo International 2016 and the co-located Pharma Expo, a joint venture with the International Society for Pharmaceutical Engineering (ISPE), at McCormick Place in Chicago...

Two growing trends in pharmaceuticals prompted the development of a new high-performance pouch that addresses the mechanical and purity challenges of packaging a liquid biologic or vaccine that requires low temperatures. The Gore Sta-Pure Flexible...

Packaging is taking on a more prominent role in protecting opioids from abuse, misuse and theft, with innovative designs leading the way. One of these uses biometric (fingerprint) authorization to ensure that patients—and only patients—receive their...

It’s hard to imagine why any of us would not comply with the prescription from our doctor. After all, we initially went to the doctor to help treat our health issues. But then we veer off the path of taking medications as prescribed, only to return...

Pharmaceutical packaging, in the form of packs that control access to opioids, has been in the limelight recently, with recently enacted legislation driving regulatory changes in the United States.

With an eye on the new legislation and the U.S...

How can pharmaceutical packaging production executives prevent “innovation inertia”? A new report outlines key points in the issue and offers solutions from industry expert Girish Malhotra, who warns that regulators are holding back the pharma...

Production capacity for Aclar films is expanding this year to meet increasing global demand, Honeywell reports in a news release. Aclar is used in blister packaging applications that require high moisture barrier performance.

“The capacity...

End-users are confirming that Anobex is “an equivalent, 'drop-in' replacement for Barex,” reports Dan Mullock, COO at MSM Poly. Samples of converted Anobex (acrylonitrile methyl acrylate copolymer latex) have already been sent to a number of...

Patient compliance is important with any prescription drug, but particularly if the drug could be habit-forming. To help ensure compliance with Instanyl, a nasal opioid, Takeda Pharmaceuticals International AG has chosen pharmaceutical packaging that...

FDA has approved a combination package containing two prescription drugs for advanced breast cancer. Novartis reports that FDA has approved the Kisqali Femara Co-Pack, calling it the "first and only" currently available combination pack...

 

The role of packaging in navigating increasing industry competition

Over the last twenty years, demand for generic pharmaceuticals has tripled in the United States.[1] As patents for...

Pharmaceutical and medical packaging solutions will be on display at Pack Expo International 2016 and the co-located Pharma Expo, a joint venture with the International Society for Pharmaceutical Engineering (ISPE), at McCormick Place in Chicago...

Pyclear Protection, a technological solution that reduces the risk of microbial contamination while allowing product manufacturers to eliminate the use of preservatives, has received the Excellence in Pharma Packaging award at CPhI WorldWide October 4...

Single-use components enhance efficiency and minimize contamination risks during the processing of bulk active pharmaceutical and biopharmaceutical ingredients (APIs). Despite these gains, the pharmaceutical industry has been slow until recently to...

It seems like the age-old question in pharmaceutical packaging—what is used more, bottles or blisters? To help us find out, a small sampling of our audience completed an informal online survey earlier this year about the package they selected for...

We were pleased when Ron Yakubison, Director of Packaging Technical Operations at Merck, joined PMP News’s Editorial Advisory Board earlier this year. Yakubison has been in packaging at Merck for 24 years and currently leads...

Arlin films provide insulation and are used as a protective cover over insulated electrical wire. Arlin offers films with high dielectric strength, moisture barrier, chemical resistance, and high temperature durability. Printed and coated films are...

“Precision to the Highest Standard” is our motto.  Bausch + Stroebel have developed into an international enterprise and are one of the leading equipment manufacturers in the pharmaceutical packaging industry.  We design and build...

Key International, Inc., a New Jersey based manufacturer founded in 1968, provides high quality packaging and processing equipment to the pharmaceutical, food, cosmetic and chemical industries.  Our goal is to be a valued partner and provide solutions...

Pharmapack SA de CV is a company in the business services industry in Mexico City, Federal District. The organization is located in Tula Refinery No 66. The privately held company was founded in 1991 (23 years ago). Pharmapack, SA de CV has been...

For nearly two decades, Bona has provided the pharmaceutical industry with packaging solutions that go beyond simple utility, providing the highest degree of quality, formula compatibility, and functionality. We offer both stock and tailored solutions,...

For more than 75 years, the Aaron Companies have been dedicated to one common goal: "To provide our customers with quality equipment, dependable service and competitive prices." This customer satisfaction has earned Aaron an International reputation...

Based in Waiblingen near Stuttgart, Germany, and employing 5,600 associates, the Bosch Packaging Technology division is one of the leading suppliers of process and packaging technology. At over 30 locations in more than 15 countries worldwide, a...

Capmatic® has grown to becoming North America's leading one-source manufacturer of liquid, tablet and powder (micro-dosage) packaging equipment. Since 1964, the company's unique solutions, unmatched passion for excellence and its dedication have...

With over 80 years of experience, we have the deepest expertise, the broadest offerings, and the most innovative technologies to help you get more molecules to market faster, enhance product performance, and provide superior, reliable manufacturing...

Deitz Company is a family owned and operated corporation based in New Jersey, USA. Founded by Stephen Deitz Sr. in 1949, the company began manufacturing photoelectric registration controls for packaging machinery. The unique design and practical...

DPT is a contract development and manufacturing organization (CDMO) with a specialized focus on semi-solid and liquid dosage forms. We offer pharmaceutical companies the broadest range of capabilities in the industry. From non-sterile to sterile, from...

Genesis is the successor company to The West Company, Machinery Systems Division, which it purchased in 1996. The company has manufactured serum vial capping equipment since 1946 and vial washers and sterilization tunnels since the late 1980′s. During...

Gerresheimer is a leading global partner to the pharma and healthcare industry. With our specialty glass and plastic products, we contribute to health and well-being. We have worldwide operations and our 11,000 employees manufacture our products in...

From Binzen, Germany to Ramsey, New Jersey in the USA to Pune, India: Glatt is present through its 14 companies and offices around the globe. Werner Glatt, the company founder, already entered the international arena in the 1960's and, with his...

Nowadays many companies aim to be innovative, creative and customer friendly. However, visions can only be realized, if you have the right strategy. In over 30 years of corporate history we have proved that we understand our game. What was once just a...

Tuesday, June 4, 2019 to Thursday, June 6, 2019

At PackEx Toronto, benefit from hands-on access to the newest packaging and processing technologies, equipment and materials.

Tuesday, June 11, 2019 to Thursday, June 13, 2019

EastPack 2019 offers cutting-edge packaging solutions for an array of markets, including food, beverage, beauty and healthcare.

Tuesday, June 11, 2019 to Thursday, June 13, 2019

MD&M East 2019, now in its 35th year, is the largest medtech event on the East Coast.

Wednesday, October 23, 2019 to Thursday, October 24, 2019

At MD&M Minneapolis 2019, discover the latest developments in medical devices and see the technologies driving tomorrow's life-saving innovations.

Thursday, October 24, 2019 to Friday, October 25, 2019

MinnPack 2019 brings the latest packaging equipment, automation and design ideas to the Midwest.