Rotating accumulation table

Lisa McTigue Pierce, Executive Editor

March 11, 2015

1 Min Read
Packaging Digest logo in a gray background | Packaging Digest


291555-Rotating_accumulation_table.jpg

Rotating accumulation table

New 48-in. diameter rotary accumulator stands at a standard 36-in. high, allowing packaging line operators to easily remove packages and load them into cartons or other secondary packaging. Packages can be fed from upstream wrappers or vertical f/f/s systems. With a "gel coat" fiberglass top for easy cleaning in washdown operations, the table has a specially coved edge to prevent packages from falling when the table is heavily loaded. Instead of being supported from a spindle, this system has four legs with two lock-and-swivel casters and two rigid casters to better accommodate unbalanced loads. The drive is DC brushless for long-lasting and maintenance-free motor life. Variable speed (from 2 to 10 rpm) and reversible rotation are standard.

 

American Design & Packaging, 715-222-1630.
www.amdesigntables.com

 


.

About the Author

Lisa McTigue Pierce

Executive Editor, Packaging Digest

Lisa McTigue Pierce is Executive Editor of Packaging Digest. She’s been a packaging media journalist since 1982 and tracks emerging trends, new technologies, and best practices across a spectrum of markets for the publication’s global community. Reach her at [email protected] or 630-272-1774.

Sign up for Packaging Digest newsletters

You May Also Like